 |
|
|
|
|
|
|
| |
 |
|
|
|
|
|
| Features |
|
• |
Each cylinder user friendly authorization and can be
programmed up to 100 cards/users. |
|
|
| • |
Add/Delete of user card on individual cylinder only. |
|
|
| • |
Available in 60 to 80 mm length. |
|
|
| • |
One master card with multiple digital cylinders |
|
|
• |
No additional accessory required. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
| Features |
|
• |
Each cylinder can accommodate access media
up to 5120 users. |
|
|
| • |
Add/Delete of user card on individual cylinder as well
as through portable programmer connected with PC
& software applicable for all multi installation of cylinder. |
|
|
| • |
Time profiling and trace back of each cylinder. |
|
|
| • |
Available in 60 to 80 mm length |
|
|
| • |
Compatible with Mifare transponder. |
|
|
| • |
Access control, time zone & access logging |
|
|
| • |
Easy setup of the classic locking plan |
|
|
| • |
Read out 1024 events of a cylinder |
|
|
| • |
User friendly software & Interface |
|
|
• |
Security, simplicity & flexibility in application |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Advantages |
|
| • |
Easy upgrade of existing mechanical
door locks to a mechatronic standalone
access system |
|
• |
Lock and cylinder independent |
|
• |
Increased operational safety with
maximum flexibility |
|
• |
Simple and fast installation. |
|
• |
No wiring required |
|
• |
Easy to program and operate |
|
• |
Energy saving electronics in inside
door shield. |
|
• |
Flexible time programming for permanent
and/or temporary access as
well as day/night and office functions
(TimePro) |
|
|
| • |
Optical (red/green) and acoustic
signalization |
|
|
| • |
Simple maintenance |
|
|
| • |
Transaction memory for the last 1,024
door movements. |
|
|
|
|
|
|
|
|
|
| Technical data |
|
• |
Battery: 3LR1 (ANS1-910A) batteries. |
|
• |
Battery: 2 years stand by/life cycle
25000 operating cycles. |
|
• |
Operating Voltage: 4.5V |
|
• |
Operating Temperature: 10~60 C. |
|
• |
Low power acoustic warning. |
|
• |
External power supply for flat battery. |
|
• |
Product Validated under EMI: EN 55022/
EMS: EN 61000-4-2 |
|
• |
RF compliance as per ET SI EN 300 330-2
# Certification : EN 1303 |
|
|
|
|
|
|
|
|
|
| Application |
|
• |
Commercial Buildings |
|
• |
Business Centers |
|
• |
Banks & Insurance Companies |
|
• |
Airports |
|
• |
Industry |
|
• |
School & University |
|
• |
Hospitals |
|
• |
Condominiums |
|
|
| • |
Residential Apartments / Luxury Villas, etc. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
According to the customer needs,
different modes of operation can
be selected. The numerous
functions are divided into two
product lines: |
| |
| Stand alone access |
|
Access for 100 media per cylinder,
without time functions. |
|
| Online Access |
|
Access for 5120 media per cylinder,
with time functions and registration
(Trace Back) memory for permanent
access authorizations. |
|
| Transponder Specification |
|
• |
RF frequency : 125 KHz / 13.56 Mhz |
|
• |
Reading distance: up to 30mm |
|
• |
Transponder package: Use Card (Mifare Card) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
Any Card will be able to access/open the digital cylinder before Master or User Card is learned into the digital cylinder. |
| |
| Before Usage |
|
• |
Take any card (Transponder) to approach the external knob of cylinder. |
|
• |
A “beep” sound will be heard, and Red LED Flash once. |
|
|
• |
Remove away the card. |
|
|
• |
A “beep” sound will be heard again, Red/Green LED Flash 3 times, and motor triggered. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
Master Card is meant to Add/Delete Users. It can not be used to access/open the digital cylinder. |
| |
| Set up the Master Card (transponder): |
|
• |
Have any unlearned Master Card ready then place it 1~3 cm in front of the external knob of cylinder. |
|
| • |
One “beep” sound will be heard, and Red LED will Flash continuous for 12 seconds. |
|
|
• |
Within these 16 seconds, do not remove the Master Card away from the knob. |
|
|
• |
If the Master Card is learned successfully, 3 “beep” sound will be heard, and Green LED will Flash 3 times. |
|
|
| • |
If you remove the Master Card within 12 seconds, then set up of Master Card will be failed. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
User will hear 10 short “beep” sound and Red/Green light Flashed 3 times in between when the cylinder is fully programmed
with 100 user Transponder. There is maximum 100 User Transponder for each cylinder. |
| |
| Multi Cylinder with one Master Card (transponder) |
|
• |
You can use one Master Card with multiple cylinders. |
|
| • |
The way to setup the Master Card for each cylinder is same as below steps. |
|
|
• |
Be aware of that, you have to take specific cylinder which you wish
to have the same Master Card. |
|
|
|
| |
| Program a New User Card (transponder) |
|
• |
Take Master Card and approach to the external knob of cylinder for induction. |
|
| • |
You will be hear 3 “beep” sound, and Green LED Flashes. |
|
|
| • |
Approach a new User Card for programming within 6 seconds. |
|
|
• |
If the User Card is learned successfully, one “beep” sound will be heard, and Green LED Flash once. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
| |
| Delete User Cards (transponder): |
|
• |
Take Master Card and approach to the external knob of cylinder for induction. |
|
| • |
You will be hear 3 “beep” sound, and Green LED Flashes. |
|
|
| • |
Move out Master Card from induction area for 2 seconds. |
|
|
| • |
Repeat step 1-3 two more times. |
|
|
• |
If the reset of Card program is done successfully, you will hear a ‘long beep’ sound, & Red Led will flashes 5 times, Then all User Cards are deleted |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
